HOBO pH and Temperature Data Logger
Bluetooth-fähiger Logger
Wichtige Informationen
Erfordert die HOBOconnect App und ein kompatibles Mobilgerät oder einen Windows-Computer. Die Systemanforderungen für die App finden Sie am Ende unserer HOBOconnect-Software-Seite. HINWEIS: pH-Elektroden sollten immer in Aufbewahrungslösung aufbewahrt werden, wenn sie nicht eingesetzt werden.
- 10 für jeweils CHF 1’000.10 kaufen und 3% sparen
- 25 für jeweils CHF 979.45 kaufen und 5% sparen
- 50 für jeweils CHF 948.55 kaufen und 8% sparen
- 100 für jeweils CHF 907.30 kaufen und 12% sparen
Overview
Designed for long-term monitoring of pH in estuaries, lakes, streams, rivers, and oceans. This logger leverages Bluetooth technology to communicate wirelessly with Onset's free HOBOconnect app running on your mobile device or Windows computer, making logger setup, calibration, and data offload quick and easy. Plus, a guided pH calibration process in the HOBOconnect app makes an otherwise complicated process easier to follow. This affordable, compact logger delivers high resolution data and dramatically cuts the time and effort needed to collect it.
Features
- Guided pH calibration following on-screen prompts in HOBOconnect app
- Rugged PVC housing for deployment in both freshwater and saltwater environments
- Quick and easy data offload via Bluetooth to mobile devices or Windows computers
- Water detection system for longer battery life and less maintenance
- Potentiometric pH electrode with plastic body, gel electrolyte, and double cloth junction
- User-replaceable battery, pH electrode, and anti-biofouling copper guard
- Accuracy of ±0.10 pH units within ±10°C of temperature at calibration
What's in the box
- MX2501 pH and Temperature Data Logger
- pH electrode
- Bottle of storage solution that can also be used as a storage container for the electrode
- Anti-biofouling copper guard
- Tube of silicone grease
- AA battery
Specifications
pH Sensor | ||
pH | mV | |
Range | 2.00 to 12.00 pH | -512 to 512 mV |
Accuracy | ±0.10 pH units within ±10°C of temperature at calibration | ±0.20 mV |
Resolution | 0.01 pH | 0.02 mV |
Response Time | 1 minute typical to 90% at constant temperature in stirred water | |
Sample Ionic Strength | ≥ 100 µS/cm | |
Temperature Sensor | ||
Range | -2° to 50°C (28.4° to 122°F) | |
Accuracy | ±0.2°C (±0.36°F) | |
Resolution | 0.024°C at 25°C (0.04°F at 77°F) | |
Response Time | 7 minutes typical to 90% in stirred water | |
Logger | ||
Operating Range | -2° to 50°C (28.4° to 122°F) — non-freezing | |
Depth Rating | IP68; waterproof to 40 m (131 ft) | |
Water Detection | Water conductivity level of 100 µS/cm or greater is necessary for reliable detection of water. Deionized water or water below 100 µS/cm may not be detected. The water conductivity circuit may not reliably detect water that has frozen around the electrodes, i.e. below 0°C (32°F). | |
Radio Power | 1 mW (0 dBm) | |
Transmission Range | Approximately 30.5 m (100 ft) line-of-sight in air | |
Wireless Data Standard | Bluetooth Low Energy (Bluetooth Smart) | |
Logging Rate | 1 second to 18 hours | |
Logging Modes | Fixed interval (normal, statistics) or burst | |
Memory Modes | Wrap when full or stop when full | |
Start Modes | Immediate, push button, date & time, or next interval | |
Stop Modes | When memory is full, push button, date & time, or after a set logging period | |
Time Accuracy | ±1 minute per month 0° to 50°C (32° to 122°F) | |
Battery Type | One AA 1.5 Volt, user-replaceable | |
Battery Life | 1 year typical at 25°C (77°F) with logging interval of 1 minute and Bluetooth Always On selected in software. 2 years typical at 25°C (77°F) with logging interval of 1 minute and Bluetooth Off Water Detect enabled in software. 3 years typical at 25°C (77°F) with logging interval of 1 minute and Bluetooth Always Off selected in software. Faster logging intervals and statistics sampling intervals, burst logging, remaining connected with the app, excessive downloads, and paging may impact battery life. | |
pH Electrode Typical Minimum Life | 6 months in sample with ionic strength ≥ 100 µS/cm | |
Memory | 152 KB (43,300 measurements, maximum) | |
Full Memory Download Time | Approximately 60 seconds; may take longer the farther the mobile device is from the logger | |
Dimensions | 22.86 x 4.27 cm (9.0 x 1.68 inches); mounting hole 0.64 cm (0.25 inches) | |
Weight | 268.2 g (9.46 oz) | |
Buoyancy | Fresh water: 13.6 g (0.48 oz) negative Salt water: 19.6 g (0.69 oz) negative | |
Wetted Materials | Logger: PVC housing and sensor end cap, polycarbonate closure caps and mounting end cap with a TPE switch pH electrode: plastic-bodied with Pellon® junctions and gel electrolyte, glass pH sensor bulb | |
The CE Marking identifies this product as complying with all relevant directives in the European Union (EU). | ||