ConLab Volt AC Transmitter Sensor
A self-powered transformer for monitoring sine wave and single-phase AC voltage; compatible with HOBO MX1100, UX120-006M, ZW series, and U series data loggers.
Important Information
Refer to data logger product pages to ensure you have the proper interfaces (modules, adapter, etc.) to deploy this sensor.
CHF 211.00
Only %1 left
SKU
T-CON-ACT-xxx
Overview
The AC Voltage transmitter is a self-powered transformer for monitoring sine wave and single-phase AC voltage. Available in two ranges: 0 to 150 Volts AC, and 0 to 300 Volts AC.
Requirements for use with specific data loggers:
- HOBO MX1100 series: a 4-20mA input cable (SD-MA-420)
- HOBO U12, UX120-006M, or ZW series: a 4-20mA input cable (CABLE-4-20mA)
Features
- Available in 2 ranges: 0 to 150 & 0 to 300 Volts AC
- Requires an input cable (part # CABLE-4-20mA)
Specifications
- Ranges: 0-150 and 0-300 volts RMS
- Sensor accuracy: < ±0.1% of span (20% to 120% of range) ±0.25% of span (10% of range)
- Over range: +20% of span
- Over load: +40% of span
- Frequency: 60 Hz AC
- Supply: Self-powered
- Output: 0–20 mA
- Response time to 90%: <240 msec
- Operating conditions: -20° to 70°C (-4° to 158°F); 5-95% RH, non-condensing
- Housing: Plastic polycarbonate
- Protection Level
Box: According to IP-50 DIN 40050
Terminals: According to IP-10 DIN 40050 - Mounting: Standard 35mm DIN rail
Notes: Because these sensors tie directly into the line, they should be used only by qualified personnel.
Requirements
- For U12 & H8 Loggers: Input Cable (Part # CABLE-4-20mA)
- For HOBO Energy Logger: FlexSmart Analog Module (Part # S-FS-CVIA)
Documentation
Conlab AC Voltage Transmitter (T-CON-ACT-150, T-CON-ACT-300) Connection Instructions
EnglishData Logger
Bluetooth (BLE) Data Loggers
USB Data Loggers - requires external sensor(s)
