Skip to the beginning of the images gallery

HOBO Carbon Dioxide/Temp/RH Data Logger

Bluetooth-enabled logger

Measures and records CO2 in buildings and other non-condensing environments.

Important Information

Requires either Onset's HOBOware software or a compatible mobile device or Windows computer and the HOBOconnect app. System requirements for the app can be found at the bottom of the HOBOconnect software page.

CHF 788.00

SKU

MX1102A

Buy 10 for CHF 764.40 each and save 3%
Buy 25 for CHF 748.60 each and save 5%
Buy 50 for CHF 725.00 each and save 8%
Buy 100 for CHF 693.45 each and save 12%

Details

Technische Daten

Datenblatt

Kompatible Artikel

Overview

Measures and records CO2 in buildings and other non-condensing environments. Works with our free HOBOconnect app for data access right from your mobile phone, tablet, or Windows computer when within 100 feet of the logger.

This logger also features a USB port so it can be used with a computer running HOBOware graphing & analysis software.

Add the MX Gateway for remote access to your data in our HOBOlink cloud software.

Features

Wireless communication via Bluetooth technology
Six-month battery life at 5-minute CO2 logging rate
Easy to deploy and offload using free HOBOconnect app
Visual and audible high & low alarm thresholds
Self-calibrating NDIR CO2 sensor technology ensures optimal accuracy and lower maintenance costs
Patented connectivity technology

What's in the box

HOBO MX1102 CO2 Data Logger
Four AA 1.5 V alkaline batteries

Specifications

Temperature Sensor

Range: 0° to 50°C

32° to 122°F
Accuracy: ±0.21°C from 0° to 50°C, see manual for plot

±0.38°F from 32° to 122°F, see manual for plot
Resolution: 0.024°C at 25°C , see manual for plot

0.04°F at 77°F , see manual for plot
Drift: <0.1°C per year

0.18°F per year

RH Sensor*

Range: 1% to 90% RH (non-condensing)
Accuracy: ±2% from 20% to 80% typical to a maximum of ±4.5% including hysteresis at 25°C (77°F); below 20% and above 80% ±6% typical
Resolution: 0.01%
Drift: <1% per year typical

CO2 Sensor

Range: 0 to 5,000 ppm
Accuracy: ±50 ppm ±5% of reading at 25°C (77°F), less than 90% RH (non-condensing) and 1,013 mbar
Warm-up Time: 15 seconds
Calibration: Auto or manual to 400 ppm
Non-linearity: <1% of FS
Pressure Dependence: 0.13% of reading per mm Hg (corrected via user input for elevation/altitude)
Operating Pressure Range: 950 to 1,050 mbar (use Altitude Compensation for outside of this range)
Compensated Pressure Range: -305 to 5,486 m

-1,000 to 18,000 ft
Sensing Method: Non-dispersive infrared (NDIR) absorption

Response Time

Temperature: 12 minutes to 90% in airflow of 1 m/s

12 minutes to 90% in airflow of 2.2 mph
RH: 1 minute to 90% in airflow of 1 m/s

1 minute to 90% in airflow of 2.2 mph
CO2: 1 minute to 90% in airflow of 1 m/s

1 minute to 90% in airflow of 2.2 mph

Logger

Radio Power: 1 mW

0 dBm
Transmission Range: Approximately 30.5 m line-of-sight

Approximately 100 ft line-of-sight
Wireless Data Standard: Bluetooth Low Energy (Bluetooth Smart)
Logger Operating Range: 0° to 50°C ; 0 to 95% RH (non-condensing)

32° to 122°F ; 0 to 95% RH (non-condensing)
Logging Rate: 1 second to 18 hours
Logging Modes: Fixed interval (normal, statistics) or burst
Memory Modes: Wrap when full or stop when full
Start Modes: Immediate, push button, date & time, or next interval
Stop Modes: When memory full, push button, date & time, or after a set logging period
Time Accuracy: ±1 minute per month at 25°C

±1 minute per month at 77°F
Power Source: 4 AA 1.5 Volt batteries (user replaceable) or USB power source (5 V DC, 2 Watts)
Battery Life: 6 months, typical with logging and sampling intervals of 5 minutes or slower; 6 months or less with logging and sampling intervals faster than 5 minutes while logging CO2. Entering burst logging mode will impact battery life. With app use, battery life can be reduced by remaining connected, excessive readouts, audible alarms, and paging. Visual/audible alarms and other events can have a marginal impact on battery life.
Memory: 128 KB (84,650 measurements, maximum)
Download Type: USB 2.0 interface or via Bluetooth Smart
Full Memory Download Time: 20 seconds via USB; approximately 60 seconds via Bluetooth Smart, may take longer the further the device is from the logger
LCD: LCD is visible from 0° to 50°C;

LCD is visible from 32° to 122°F;

the LCD may react slowly or go blank in temperatures outside this range
Size: 7.62 x 12.95 x 4.78 cm

3.0 x 5.1 x 1.88 inches
Weight: 267.4 g

9.43 oz
Environmental Rating: IP50