Self-Describing 6-foot Pipe Temperature Sensor
For use with HOBO MX1104 and MX1105 Multi-Channel Data Loggers, this temperature sensor, which is suitable for pipe mounting, offers integrated strain relief, so the probe is secured to the logger.
CHF 111.00
SKU
SD-TEMP-P-06
- Buy 10 for CHF 107.70 each and save 3%
- Buy 25 for CHF 105.45 each and save 5%
- Buy 50 for CHF 102.15 each and save 8%
- Buy 100 for CHF 97.70 each and save 12%
Overview
For use with HOBO MX1104 and MX1105 Multi-Channel Data Loggers, this temperature sensor, which is suitable for pipe mounting, offers integrated strain relief, so the probe is secured to the logger. And it features Self-Describing technology to automatically communicate configuration information to the logger, without any programming or extensive user setup.
Features
- Self-Describing technology for quick, easy set up
- Locking jack to ensure sensor is connected and stays connected
- Measurement range of -40° and 100°C (-40° to 212°F)
- Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F)
- Available in 1.8 m (6 ft)
- Faster response time
- Suitable for pipe mounting
Specifications
Measurement Range | -40° to 100°C (-40° to 212°F) |
Accuracy | ±0.15°C from 0° to 50°C (±0.27°F from 32° to 122°F), insert probe 2.3 cm (0.9 inches) minimum; see Plot A |
Resolution | 0.002° at 25°C (0.003° at 77°F) |
Drift | <0.1°C (<0.2°F) per year |
Response Time in Air | 2 minutes typical to 90% in air moving 1 m/s (2.2 mph) |
Response Time on a Pipe | Typically 2 times faster than the SD-TEMP-xx air/water/soil temperature probe; typically less than 1 minute to 90% |
Probe Housing | Copper-plated sensor tip |
Probe Dimensions | 0.9 x 5.8 cm (0.38 x 2.3 inches) |
Cable Length | 1.8 m (6 ft) |
Data Logger
Bluetooth (BLE) Data Loggers
Accessory
NIST Setup & Certifications