![RG3 external Pendant logger mounting diagram](/images/pendant-mounted-externally-thumb_RG3.jpg)
HOBO Rain Gauge Data Logger
Version américaine (avec enregistreur de données)
Un système de collecte et d'enregistrement de données pluviométriques alimenté par batterie qui comprend un enregistreur de données HOBO Pendant Event intégré à un pluviomètre à auget basculant.
Important Information
Exigences Logiciel HOBOware (câble d'interface USB inclus avec l'achat du CD) et un dispositif de communication. Voir les éléments compatibles ci-dessous.
662,00 CHF
SKU
RG3
- Acheter 10 pour 642,15 CHF et économisez 3%
- Acheter 25 pour 628,90 CHF et économisez 5%
- Acheter 50 pour 609,05 CHF et économisez 8%
- Acheter 100 pour 582,60 CHF et économisez 12%
Overview
A battery-powered rainfall data collection and recording system that includes a HOBO Pendant Event data logger integrated into a tipping-bucket rain gauge. This model automatically records up to 160 inches of rainfall at rates up to 12.7 cm (5 in) per hour. Easily collect rainfall, time, and duration data, as well as temperature when used with an optional solar radiation shield (RS1 Solar Radiation Shield or M-RSA). A base station or shuttle is required.
![RG3 external Pendant logger mounting diagram](/images/pendant-mounted-externally-thumb_RG3.jpg)
Features
- High quality tipping-bucket rain gauge includes a HOBO Pendant Event data logger. Base station or shuttle is required
- Time and date stamp is stored for each tip - provides detail needed to determine rainfall rates and duration
- Reliable, field-proven rain gauge
- Compatible with HOBOware and HOBOware Pro software for logger setup, graphing, and analysis
- Also records temperature when used with an optional solar radiation shield
What's in the box
- Tipping-bucket rainfall collector
- HOBO Pendant Event Logger
- Mounting accessories: two hose clamps, three screws
Specifications
Rain Gauge
- Maximum Rainfall Rate
-
12.7 cm per hour5 in. per hour
- Calibration Accuracy
-
±1.0% (up to 1 in. per hour)
- Resolution
-
0.01 in.
- Calibration
-
Requires annual field calibration, see Field Calibration section in manual
- Operating Temperature Range
-
0° to 50°C32° to 122°F
- Storage Temperature Range
-
-20° to 70°C-4° to 158°F
- Environmental Rating
-
Weatherproof
- Housing
-
15.24 cm aluminum collector and base6 in. aluminum collector and base
- Tipping-bucket Mechanism
-
Stainless steel shaft with brass bearings
- Dimensions
-
25.72 cm height x 15.24 cm diameter10.125 in. height x 6 in. diameter15.39 cm receiving orifice6.06 in. receiving orifice
- Weight
-
1.2 Kg2.5 lbs
Logger
- Time Stamp Resolution
-
1.0 second
- Time Accuracy
-
±1 minute per month at 25°C (77°F)
- Operating Range
-
-20° to 70°C-4° to 158°F
- Environmental Rating (for Logger Used Outside of Rain Gauge)
-
Tested to NEMA 6 and IP67; suitable for deployment outdoors
- NIST Traceable Certification
-
Available for temperature only at additional charge; temperature range -20° to 70°C (-4° to 158°F)
- Battery
-
CR-2032 3V lithium battery; 1 year typical use
- Memory
-
64K bytes – 16K to 23K when recording events only; 25K to 30K data points when recording events and temperature; see Data Storage.
- Materials
-
Polypropylene case; stainless steel screws; Buna-N O-ring; PVC cable insulation
Temperature Measurement (see Using the Logger for Temperature Measurement section)
- Measurement Range
-
-20° to 70°C-4° to 158°F
- Accuracy
-
±0.54°C from 0° to 50°C (± 0.97°F from 32° to 122°F), see manual for plot. A solar radiation shield is required for accurate temperature measurements in sunlight.
- Resolution
-
0.10°C at 25°C , see manual for plot0.18°F at 77°F , see manual for plot
- Drift
-
Less than 0.1°C/year (0.2°F/year)
- Response Time
-
Airflow of 1 m/s (2.2 mph): 10 minutes, typical to 90%
![CE Compliance Mark](/images/ce-mark.png)
Accessory
Data Offload - Base Stations - Shuttles - Couplers
Compliance Certificates
Maintenance
Batteries
Desiccants
Required Communications
Data Offload - Base Stations - Shuttles - Couplers