![CE Compliance Mark](/images/ce-mark.png)
HOBO H22 Energy Data Logger
Multi-Channel Data Logger
Informazioni importanti
Sensori esterni venduti separatamente. Richiede il software HOBOware e il codice prodotto ADAPT-SER-USB cavi di interfaccia. Vedere gli articoli compatibili di seguito.
- Acquista 10 a 521,90 CHF ciascuno e risparmia 3%
- Acquista 25 a 511,10 CHF ciascuno e risparmia 5%
- Acquista 50 a 495,00 CHF ciascuno e risparmia 8%
- Acquista 100 a 473,45 CHF ciascuno e risparmia 12%
Overview
This 15-channel data logger lets energy and facility managers monitor energy and industrial equipment to quickly and easily detect and address a variety of issues relating to HVAC, machinery, and other systems. A modular device, the HOBO H22-001 Energy Data Logger is more economical than its alternatives because it eliminates the need for a toolbox full of data loggers.
Deploying this logger with a variety of pre-defined plug-and-play smart sensors create a robust monitoring system, and it's compatible with HOBOware software, so researchers can conduct effective data analysis in minutes.
Features
- Flexible data logger records up to 15 channels of more than a dozen measurements
- Provides 12v excitation for third-party sensors
- Pre-configured Smart Sensors get you started fast
- Signal conditioning modules retain configurations until you change them, providing plug-and-play convenience for commonly used sensors
- Flexible power options include battery operation for AC power adapter
What's in the box
- HOBO H22-001 Energy Logger
- Eight 1.5V alkaline batteries
- 1 miniature slotted screwdriver
- Blank label
- Rubber feet
Specifications
No category
- Operating range
-
-20° to 50°C with alkaline batteries-4° to 122°F with alkaline batteries-40° to 60°C with lithium batteries-40° to 140°F with lithium batteries
- Sensor inputs
-
Three FlexSmart multi-channel modules and up to 6 Smart Sensors (which may have multiple parameters/channels)
- Sensor connectors
-
Six RJ-12 Smart Sensor jacks plus 3 FlexSmart module slots
- Communication
-
RS-232 via 3.5 mm serial port or/and 9-pin D-Sub connector
- Dimensions
-
15.6 cm x 8.4 cm x 4.6 cm6.13" x 3.31" x 1.81"
- Weight
-
435 g with batteries15.23 oz with batteries238 g without batteries8.33 oz without batteries
- Memory
-
512K nonvolatile flash data storage
- Memory modes
-
Stop when full; wrap when full
- Operational indicators
-
Six indicators provide logging and sensor network status
- Logging interval
-
One second to 18 hours, user-specified interval (2-second minimum for two-channel S-FS-TRMSA operation)
- Sensor excitation
-
12 V DC at 200 mA total, with user-programmable warmup time on a per-channel basis
- Battery life
-
One year typical use (up to 75 mA excitation with 10-minute or longer logging Interval and 1-second warmup time)
- Battery type
-
Eight standard AA alkaline batteries included (for operating conditions -20°C to 50°C)Eight standard AA alkaline batteries included (for operating conditions -4°F to 122°F)Optional AA lithium batteries available for operating conditions of -40° to 60°C.Optional AA lithium batteries available for operating conditions of -40° to 140°F.
- External power
-
Supports optional 13.6 V DC regulated AC Wall Adapter Connector. Internal batteries may remain installed. Alternatively, an automotive battery or 9-12 V DC regulated Wall Adapter may be used, but it is recommended to remove the internal batteries since they will discharge to the level of the external supply.
- Time accuracy
-
0 to 2 seconds for the first data point and ±5 seconds per week at 25°C0 to 2 seconds for the first data point and ±5 seconds per week at 77°F
- Logging mode
-
Immediate, timed delay, or trigger (button-push) start options; supports sampling intervals for some sensors
- Data communication
-
Current readings while logging; read out while logging; read out when stopped
![CE Compliance Mark](/images/ce-mark.png)